Fluidized Bed Powder Coating
We will provide the best Industrial Service
CAPABILITIES LINKS
Our Plant
Copper Sourcing
Engineering Support
FABRICATION
Electroplating
Fluidized Bed Powders are applied by dipping heated metal parts in an aerated powder bed . The powder melts on the hot part and results in a smooth continuous plastic film encapsulating the metal.
The fluidized bed has three main sections. A top powder hopper where the powder is held, a porous plate which allows air to pass through, and a sealed bottom air chamber. When pressurized air is blown into the air chamber it passes through the plate and causes the powder to float or "fluidize". This allows the metal part to be coated to be moved through the powder with little resistance. See our coating services page for more options.
The fluidized bed has three main sections. A top powder hopper where the powder is held, a porous plate which allows air to pass through, and a sealed bottom air chamber. When pressurized air is blown into the air chamber it passes through the plate and causes the powder to float or “fluidize”. This allows the metal part to be coated to be moved through the powder with little resistance. See our coating services page for more options.
Key Benefits
Entire part coated
Corrosion Resistance
Noise Reducing
Vibration Dampening
Electrical Resistance
- Entire part coated
- Corrosion Resistance
- Noise Reducing
- Vibration Dampening
- Electrical Resistance
Typical Properties
| Table header | Table header |
|---|---|
| Electrical Insulation | 600 + volts/mil |
| Tensile Strength | 2000 PSI |
| Tear Strength | 200 PLI |
| Elongation | 200 % |
| Hardness ( Shore A ) | 85 - 90 |
| Heat & Light Stability | Excellent |
| Outdoor Weathering | Good |
| Maximum Operating Temperature | 210 degree F |
| Chemical Resistance | Good |
| Abrasion Resistance | Good |
